▲

Configuration by script

RELEASE NOTE

2024-10-08 V1.10.23 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for these new functions
    • enableHttpsTasksManager()
    • disableHttpsTasksManager()
    • setHttpsTasksManagerUrl()
    • setHttpsTasksManagerCredential()
    • setHttpsTasksManagerCreateCredentialForBasicAuthentication()
    • setHttpsTasksManagerCreateCredentialNone()
    • setHttpsTasksManagerHeartbeat()
COMPATIBILITIES
  • AOSP Qeedji System 9.11.10 (or above) for
    • TAB10s device
    • AMP300 device

INFORMATION

DOCUMENTATION

For further information, refer to the TAB10s and AMP300 device user manual.

OLD VERSIONS HISTORY

2023-07-06 V1.10.22 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for these new functions
    • enableTestCardAppLaunchingWithKeySequence()
    • disableTestCardAppLaunchingWithKeySequence()
    • enableHdmiCec()
    • disableHdmiCec()
    • enableHdmiCecPowerMode()
    • disableHdmiCecPowerMode()
    • enableUsbcDdc()
    • disableUsbcDdc()
    • enableUsbcDdcPowerMode()
    • disableUsbcDdcPowerMode()
    • enableUsbcDdcBrightness()
    • disableUsbcDdcBrightness()
    • setAVCommandPowerModeLevelForVeryHighlyOptimizedProfilePowerManagerTask()
    • setAVCommandBrightnessLevelForVeryHighlyOptimizedProfilePowerManagerTask()
    • setAVCommandPowerModeLevelForHighlyOptimizedProfilePowerManagerTask()
    • setAVCommandBrightnessLevelForHighlyOptimizedProfilePowerManagerTask()
    • setAVCommandBrightnessLevelForNominalMode()

2023-04-03 V1.10.21 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for these new functions
    • setRebootCalendar()
    • setPowerManagerCalendar()
    • setAudioOuptut()
    • setProfileForAppsPowerManagerTasks()
    • setPreferencesPowerManagerProfileVeryHighOptimized()
    • setPreferencesPowerManagerProfileHighOptimized()

2023-01-24 V1.10.20 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for these new functions
    • enableTestCardAppLaunching()
    • disableTestCardAppLaunching()
    • setWebserverCredentialApplicationWebServiceAdmin()
    • setWebserverCredentialApplicationWebServiceCustom()
  • Add support for these new functions to get dynamically some device information
    • getSoftwareVersion()
    • getModel()
    • getManufacturer()
    • getDeviceName()
    • getHostname()
    • getMacId()
    • getUUID()
    • getPsn()
    • getSerial()
    • getField1()
    • getField2()
    • getField3()
    • getField4()
    • getField5()
  • Change: rename setWebserverCredentialWebServiceAdmin() function into setWebserverCredentialAdministrationWebServiceAdmin()
  • Change: rename setWebserverCredentialWebServiceCustom() function into setWebserverCredentialAdministrationWebServiceCustom()
  • Fix: the setHostname() function was not forcing the hostname set by the user
  • Fix: the clearHostname() function was not unforcing the hostname set by the user

2022-12-02 V1.10.19 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for these new functions to handle App installed in the AQS desktop
    • eraseAllApps()
    • deleteApp()
    • activateApp()
    • deactivateApp()

2022-10-21 V1.10.18 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for checkCompatibility() function of the beginning at the file to prevent the script to be executed on others device than AQS operating system
  • Add support for getPlatform() function
  • Add support for setLanProxyPAC() function
  • Add support for these functions for the AMP300 device:
    • setVideoOuptut()
    • setScreenResolution()
    • setVesaDpmsEnabled()
    • setScreenRotation()
    • setVolumeOfMultimediaContents()
  • Add support for these functions to change user/password of Admin credential and to affect them to the different connection profiles:
    • setWebserverCredentialUserPasswordAdmin()
    • setWebserverCredentialAdministrationUserAdmin()
    • setWebserverCredentialWebServiceAdmin()
    • setWebserverCredentialApplicationUserAdmin()
    • setWebserverCredentialPublishingSoftwareAdmin()
  • Add support for these functions to create your custom credential and to affect these credential to the different connection profiles:
    • setWebserverCredentialUserPasswordCustom()
    • setWebserverCredentialAdministrationUserCustom()
    • setWebserverCredentialWebServiceCustom()
    • setWebserverCredentialApplicationUserCustom()
    • setWebserverCredentialPublishingSoftwareCustom()
  • Change: remove these functions:
    • setWebserverCredentialUserPassword()
    • setWebserverCredentialWebUIAdmin()
    • setWebserverCredentialWebUIAppli()
    • setWebserverCredentialWebDav()
    • setWebserverCredentialWebService()
  • Change this function to support TKIP or CCMP (AES) group cipher key support removal, TKIP or CCMP (AES) pairwise cipher keys support removal, WPA-Personal or WPA2-Personal protocols support removal:
    • setWlanSecurityPsk()
  • Change these functions to support TKIP or CCMP (AES) group cipher key support removal, TKIP or CCMP (AES) pairwise cipher keys support removal, WPA-Enterprise or WPA2-Enterprise protocols support removal, 802.1X CA certificate validation or System certificate validation mode (including support for trusted RADIUS certificate common name definition):
    • setWlanSecurityPEAP_MSCHAPV2()
    • setWlanSecurityPEAP_GTC()
    • setWlanSecurityPEAP_NONE()
    • setWlanSecurityTLS()
    • setWlanSecurityTTLS_PAP()
    • setWlanSecurityTTLS_MSCHAP()
    • setWlanSecurityTTLS_MSCHAPV2()
    • setWlanSecurityTTLS_GTC()
    • setWlanSecurityTTLS_NONE()
    • setWlanSecurityPWD()
  • Fix: when using these functions, it was not possible to connect anymore to the device Web user interface when the device is behind a router with 802.1X security activated:
    • setLanProxy()
    • setLanProxyUserPassword()
    • setLanProxyPAC()
    • deleteLanProxy()
  • Fix: when using these functions, it was not possible to connect anymore to the device Web user interface when the WIFI router configured in WPA-Enterprise or WPA2-Enterprise security:
    • setWlanProxy()
    • setWlanProxyUserPassword()
    • setWlanProxyPAC()
    • deleteWlanProxy()

2022-08-19 V1.10.17 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for this new functions
    • setAppAsSystemApp();
    • setWebserverCredentialUserPassword()
    • setWebserverCredentialWebUIAdmin()
    • setWebserverCredentialWebService()
    • setWebserverCredentialWebUIAppli()
    • setWebserverCredentialWebDav()
  • Add support for an example to set a empty Proxy exclusion list
  • Change: remove these functions
    • setWebserverNativeCredentialWebUIAdmin()
    • setWebserverNativeCredentialWebDAV()
  • Change: replace tab10_ by qeedji_device_
  • Change: remove the commented call to setDefaultTimezone()
  • Change: add these new commented function calls to set different regionality languages
    • setSystemLocalLanguages("fr-FR,en-US,it-IT,de-DE,es-ES,ru-RU")
    • setSystemLocalLanguages("it-IT,en-US,fr-FR,de-DE,es-ES,ru-RU")
    • setSystemLocalLanguages("de-DE,en-US,fr-FR,it-IT,es-ES,ru-RU")
    • setSystemLocalLanguages("es-ES,en-US,fr-FR,it-IT,de-DE,ru-RU")
    • setSystemLocalLanguages("ru-RU,en-US,fr-FR,it-IT,de-DE,es-ES")
COMPATIBILITIES
  • AOSP Qeedji System 9.10.10 beta11 (or above) for
    • TAB10s device
  • AOSP Qeedji System 9.10.10 beta3 (or above) for
    • AMP300 device

2022-07-08 V1.10.16 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Change: English language is set by default in the setSystemLocalLanguages example
  • Add support for these new functions to configure Proxy server on LAN interface
    • setLanProxy()
    • setLanProxyUserPassword()
    • deleteLanProxy()
  • Add support for these new functions to configure Proxy server on WLAN interface
    • setWlanProxy()
    • setWlanProxyUserPassword()
    • setWlanProxyPAC()
    • deleteWlanProxy()
  • Add support for this new function to set the device UTC time
    • setUtcTime()
  • Change: the function setWebserverNativeCredentialWebUIAdmin() to support credentials adding in Web UI
  • Change: the function setWebserverNativeCredentialWebDAV() to support credentials adding in Web UI
COMPATIBILITIES
  • AOSP Qeedji System 9.10.10 beta10 (or above) for
    • TAB10s device
  • AOSP Qeedji System 9.10.10 beta1 (or above) for
    • AMP300 device

2021-11-10 V1.10.15 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for new functions to configure the WLAN interface
    • setWlanByDhcp("SSID", false);
    • setWlanIpAddress("SSID", false, "192.168.0.2", "255.255.255.0", "192.168.0.6", "192.168.0.1", null);
    • setWlanSecurityWep("SSID", wepKey);
    • setWlanSecurityPsk("SSID", key);
  • Add support for user certificates installation
  • Add support for CA certificates installation
  • Add support for proximity sensor configuration
    • setProximitySensorMaxDistance(50 X n); (n from 2 to 12 cm)
  • Add support for 802.1X configuration for LAN interface with configuration script
    • setLanSecurityPEAP_NONE(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityPEAP_MSCHAPV2(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityPEAP_GTC(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityPEAP_MD5(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTLS("my_tab10_identity", caCertificates, clientPrivateKey, clientCertificateChain);
    • setLanSecurityTTLS_NONE(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_PAP(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_MSCHAP(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_MSCHAPV2(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_CHAP(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_GTC(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_MD5(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_EAP_MSCHAPV2(caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setLanSecurityTTLS_TLS("my_tab10_identity", caCertificates, clientPrivateKey, clientCertificateChain);
    • setLanSecurityPWD("my_tab10_identity", " my_tab10_pwd");
    • setLanSecurityMD5("my_tab10_identity", " my_tab10_pwd");
    • setLanSecurityGTC("my_tab10_identity", " my_tab10_pwd");
    • setLanSecurityMSCHAPV2("my_tab10_identity", " my_tab10_pwd");
  • Add support for WEP/PSK/802.1X security configuration for WLAN interface with configuration script
    • setWlanSecurityWep("my_SSID", "my_wep_key_value");
    • setWlanSecurityPsk("my_SSID", "my_psk_key_value");
    • setWlanSecurityPEAP_NONE("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityPEAP_MSCHAPV2("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityPEAP_GTC("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityTLS("my_SSID", caCertificates, clientPrivateKey, clientCertificateChain, "my_tab10_identity");
    • setWlanSecurityTTLS_NONE("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityTTLS_PAP("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityTTLS_MSCHAP("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityTTLS_MSCHAPV2("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityTTLS_GTC("my_SSID", caCertificates, "my_tab10_identity", "my_tab10_anonymousIdentity", "my_tab10_pwd");
    • setWlanSecurityPWD("my_SSID", "my_tab10_identity", "my_tab10_pwd");
  • Add support for new function to set the supported languages (first is the default one)
    • setSystemLocalLanguages("fr-FR,en-US,it-IT,de-DE,es-ES,ru-RU");
  • Change: remove the functions
    • setSystemLocalLanguage_de_DE();
    • setSystemLocalLanguage_en_US();
    • setSystemLocalLanguage_es_ES();
    • setSystemLocalLanguage_fr_FR();
    • setSystemLocalLanguage_it_IT();
    • setSystemLocalLanguage_ru_RU();
  • Change: remove setProximitySensorType() function
  • Change: rename enableWifi() function by enableWlan()
  • Change: rename disableWifi() function by disableWlan()
COMPATIBILITIES
  • AOSP firmware 9.10.10 beta9 (or above) for
    • TAB10s device

2021-04-07 V1.10.14 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Change: the functions name to set the login credentials for the WebDAV server
    • setWebserverNativeCredentialWebUIAdmin("admin", "admin");
    • setWebserverNativeCredentialWebDAV("admin", "admin");
  • Add support for functions to set a static IP address or an IP address allocated by DHCP for LAN interface
    • setLanByDhcp();
    • setLanIpAddress("192.168.0.2", "255.255.255.0", "192.168.0.6", "8.8.8.8", "8.8.8.4");
      • param1: IP address
      • param2: netmask
      • param3: gateway
      • param4: primary DNS
      • param5: secondary DNS
  • Add support for functions to set DeviceInfoField1 to DeviceInfoField5 variables
    • setSystemDeviceInfoField1("value1");
    • setSystemDeviceInfoField2("value2");
    • setSystemDeviceInfoField3("value3");
    • setSystemDeviceInfoField4("value4");
    • setSystemDeviceInfoField5("value5");
COMPATIBILITIES
  • AOSP firmware 9.10.10 beta8 (or above) for
    • TAB10s device

2021-03-17 V1.10.13 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for new functions to set the login credentials for the WebDAV server
    • setWebserverHttpPort("80");
    • setWebserverCredentialWebUIAdmin("admin", "admin");
    • setWebserverCredentialWebDAV("admin", "admin");
  • Add support for new function to set the AOSP device name
    • setDeviceName("TAB10s");
  • Add support for new functions to set/clear the AOSP device hostname
    • setHostname("TAB10s");
    • clearHostname();
  • Add support for new functions to change the AOSP device language
    • setSystemLocalLanguage_de_DE();
    • setSystemLocalLanguage_en_US();
    • setSystemLocalLanguage_es_ES();
    • setSystemLocalLanguage_fr_FR();
    • setSystemLocalLanguage_it_IT();
    • setSystemLocalLanguage_ru_RU();
  • Add support for new functions to
    • setNtpServer("time.android.com");
    • setNtpTimeout(5000);
  • Add support for new functions to activate/inactivate the RFID 125 KHz sensor
    • enableRfid125KHz();
    • disableRfid125KHz();

2020-10-19 V1.10.12 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for the functions:
    • enableBluetooth();
    • disableBluetooth();
    • enableWifi();
    • disableWifi();
  • Change: these function are now only compatible with the AOSP firmware 9.10.10 beta5 (or above)
    • getExternalStorageCopyApk();
    • enableExternalStorageCopyApk();
    • disableExternalStorageCopyApk();
  • Change: remove showToast debug function
COMPATIBILITIES
  • AOSP firmware 9.10.10 beta5 (or above) for
    • TAB10s device

2020-09-16 V1.10.11 Download

BUG FIX, NEW FEATURES, MINOR UPDATES
  • Add support for the functions:
    • setDeviceModeNative();
    • setDeviceModeKiosk();